Double thickness binding and I are not friends. When I was making quilts, adding it to cover up the raw edges was my least favorite part of the process. My corners never did get up to snuff (according to the powers that be). So once I moved to art quilts, I started looking for another way. And since I no longer enter pipe and drape shows, I can do whatever I (and the art) want to finish the edges.
Sometimes I just use a tight zigzag or one of the finishing stitches on my machine. But my favorite way is to find yarns that set off colors in the piece, and zigzag over them.
Although it doesn’t show well in this photo, I really lucked out with this piece. The violet and orange in these two yarns goes great with the fabrics. The piece may have other problems (I see unsewing in my future), but the edge is nicely finished.
Here the fuzziness of the yarn sets off the shininess of the silk. The piece is about leafless woods in early winter, and the grey bits poking out add to the atmosphere I’m trying to envoke.
Here I used the same silk yarn (made from leftover bits) on the edge that was used in the piece. It helps tie the whole thing all together.
I do use a braiding foot to sew the yarns on–it holds the yarns together so that the zigzag stitch (which may be widened as needed) encases the yarns. I usually put a small piece of tape around the end to help thread the yarns through the foot before starting. Often I do a quick narrow zigzag around the edge immediately after trimming the edges down, just to make the adding of the yarn easier.
So, give it a try–it’s easier to learn than turning those pesky corners of binding.



























